D-Link DAP-2695 User Manual page 49

Web User Interface
Get IP From :
Static IP (Manual) is chosen here. Choose this
option if you do not have a DHCP server in
your network, or if you wish to assign a static
IP address to the DAP-2695. When Dynamic IP
(DHCP) is selected, the other fields here will be
grayed out. Please allow about 2 minutes for the
DHCP client to be functional once this selection
is made.
IP Address :
Assign a static IP address that is within the IP
address range of your network.
Subnet Mask :
Subnet Mask : Enter the subnet mask. All devices
in the network must share the same subnet mask.
Gateway :
Enter the IP address of the gateway/router in
your network.
DNS :
Enter a DNS server IP address. This is usually the
local IP address of your gateway/router.
Radius Server:
Enter the RADIUS server's IP address here
Radius Port:
Enter the RADIUS server's port number here
Radius Port:
Enter the RADIUS server's shared secret here
Remote Radius Type: Select the remote RADIUS server type here.
Currently, only SPAP will be used.
D-Link DAP-2695 User Manual
49