Wds Mode - D-Link DAP-2695 User Manual

Web User Interface

WDS Mode

Wireless Band: Select either 2.4GHz or 5GHz from the drop-down
menu.
Mode: WDS is selected from the drop-down menu.
Network Name (SSID): Service Set Identifier (SSID) is the name designated
for a specific wireless local area network (WLAN). The
SSID's factory default setting is dlink. The SSID can
be easily changed to connect to an existing wireless
network or to establish a new wireless network.
SSID Visibility: Enable or Disable SSID visibility. Enabling this
feature broadcasts the SSID across the network, thus
making it visible to all network users.
Auto Channel Selection: Enabling this feature automatically selects
the channel that will provide the best wireless
performance. This feature is not supported in WDS
mode.
Channel: All devices on the network must share the same
channel. To change the channel, use the drop-down
menu to make the desired selection.
Channel Width: Use the drop-down menu to choose 20 MHz or
Auto 20/40 MHz.
AP MAC Address:
Enter the MAC addresses of the root AP of this WDS
network. If left empty, then this device is the the
root AP.
16
D-Link DAP-2695 User Manual