Page 1
Vitalograph micro Using this guide it will take you just a few minutes to install your Vitalograph Reports Utility software on your PC and configure it to receive report data from your Vitalograph spirometry device and save it in PDF format. If you need further instruction details, you will find the User Manual on the CD provided.
Page 2
Serial converter, such as Vitalograph Cat No 77051. Follow the install instructions on the CD. IMPORTANT: If you use a USB/Serial converter, you will need to change the setting of the Com Port in the Vitalograph Reports Utility. Open the utility by right clicking on the blue ‘V-Snake’ icon at the bottom right-hand side of your taskbar.
Page 3
IMPORTANT: YOU MUST SHUT DOWN AND RESTART YOUR PC AFTER INSTALLATION The Vitalograph Reports Utility on your PC receives spirometry report data from your Vitalograph micro. It converts the report to a PDF format file for viewing, printing, archiving, e-mailing, etc.
Need help?
Do you have a question about the Micro and is the answer not in the manual?
Questions and answers