Configure People Counting - HIKVISION DS-MP1803 Quick Start Manual

Step 2 Select Camera No.
Step 3 Check behaviors to analyze and configure Alarm Time and Confidence Interval.
 Alarm Time: Device alarms when the corresponding driving behavior lasts for the set time.
 Confidence Interval: Available for on-the-phone detection and smoking detection. You are
recommended to use the default value.
 Stop Detections when Driving in Low-Speed: The feature is valid when GPS positioning
succeeded.
 Voice Alarm: When it is checked, device will send out voice alarm when a checked behavior is
detected.
Step 4 Click Save.

5.5 Configure People Counting

Step 1 Go to Configuration > VCA > People Counting.
Step 2 Select Camera No.
Step 3 Adjust the counting area (red frame) position and size.
Step 4 Set detection line (orange line) position and direction. Device counts people that passing the
detection line along the set direction.
1) Drag detection line to vehicle door
2) Click
Step 5 Set OSD (On Screen Display) parameters. People counting result will be displayed in OSD.
1) Check Display OSD.
2) Adjust OSD (yellow frame) position.
3) Select OSD Type.
Step 6 Click Save.
Intelligent Analyzer Quick Start Guide
to adjust detection direction. The arrow detection is the entry direction.
20