Step 2. Designate Setup File - Edelbrock QwikData 2 Quick Start Manual

Getting Started

Step 2. Designate Setup File.

Use this function to designate a specific setup file for editing.
Open the Configuration program by double clicking the Configuration Icon on your desktop.
1. On the Menu Bar under File select Set Current Car.
2. Select Car #01-Sample to highlight and click OK to set as a template for your new setup.
The Set Current Car window will close, all changes made in the Configuration program will now be saved to
Car 01 setup file.
NOTES
* The sample setup (Car#01) is a blank setup for you to use as a template to create your own setup. The setup
file contains all your sensor channel calibrations, names, logging table etc
* The setup file name (currently sample) will be changed in Step 5 under car data when you assign a car
name.
Hide ECU Channels
· To further simplify your setup procedure, if you are using your logger without an ECU interface you can use
the Hide ECU Channels menu option. This option will hide all ECU channels not related to your setup.
1. On the Menu Bar under Logger, select Hide ECU Channels.
A check mark will be placed next to the option indicating all ECU channels will be hidden in logger setup.
5
Edelbrock QwikData 2