Edelbrock QwikData 2 Quick Start Manual page 12

Getting Started
5. Select the tab to display the sensor type i.e: Pressure,Temperature, Lambda, Misc..
· Sensor calibrations are listed by part number or description and are available in various ranges and
units.
6. Double Click on a sensor name to select (Fig.3).
Fig.3
· The calibration window will reopen with the selected calibration applied (Fig.4).
Fig.4
7. Repeat steps 2 thru 6 for next sensor.
8. To save changes exit Calibration Window or under File on the menu bar select Save Changes .
11
Edelbrock QwikData 2