Graco SnugRide SnugLock 30 Instruction Manual page 45

3-D Install Without Base
Rear-Facing With
Vehicle Seat Belt
1. Secure Child In
the Car Seat
See Section 4.
2. Place Car Seat in
Back Seat of the
Vehicle
Place the car seat
on the vehicle seat.
Push it back until the
front of the car seat
touches the vehicle
seat back.
Check the rear-facing
level line. The red level
line on the side of the
seat MUST BE LEVEL
with the ground.
If needed, rolled
towels may be placed
under the base, at the
vehicle seat crease,
until the level line is
level with the ground.
41