Month of construction Year of construction 1. Under nor mal working conditions can be used in a Zone 1 environment. 2. Classification based on tests cutting a selection of steels & composite materials (MB, MC, Yellow, JSZ ) Blades Identifier number...
12. When the cut is complete release the No more than 24 teeth in contact catch to stop the machine. Remove air supply before attempting to remove machine from spigot (reverse of 5 above). Visit our website www.cengar.com to view our range of blades, clamps and accessories.
Page 4
JSZ EXPLODED VIEW ADDITIONAL CENGAR SAWS AVAILABLE PL905 CL75 Steel Sections Bolts, Gratings etc. up Steel Pipe up to 150mm dia to 6mm thick and 25mm Composites. and similar size sections. CS75 JP901 NUMBER PART NUMBER ITEM PART NO. DESCRIPTION...
Page 5
SERVICE We offer a full factory repair and refurbishment service for Cengar Saws, normally within 5 working days. Quotations at no charge can be given before work is carried out. DISTRIBUTOR ADDRESS Cengar Ltd. Springfield Works, Saddleworth Road, Greetland, Halifax,...