Download Print this page

Cengar CS75 Operating Instructions

Atex approved

Download this manual

AIR SAWS FOR THE PROFESSIONAL

CS75

operating instructions

Page 1 AIR SAWS FOR THE PROFESSIONAL CS75 operating instructions...
Page 2: Eu Declaration Of Conformity
(on the certificate) 4. A filter must be fitted to the supply compressor inlet to prevent dust airflow within the equipment. To comply with ATEX certification regulations it is necessary to use Cengar branded Blades with Cengar Saws. Identifier number Month of construction 1.
Page 3: Do's And Don'ts
This will invalidate ATEX approval and warranty. 9. Press trigger and apply Ideally between 6 and 12 teeth in contact light downward pressure. No more than 24 teeth in contact Visit our website www.cengar.com to view our range of blades, clamps and accessories.
Page 4 CS INSTRUCTIONS USING THE PIPE CLAMP CS75 EXPLODED VIEW 1. When using the pipe clamp fit the blade into the machine with the teeth facing upwards and towards the machine. Avoid handling the blade teeth. ( 9 5 0 7 C F A ) 2.
Page 5 SERVICE We offer a full factory repair and refurbishment service for Cengar Saws, normally within 5 working days. Quotations at no charge can be given before work is carried out. DISTRIBUTOR ADDRESS Cengar Ltd. Springfield Works, Saddleworth Road, Greetland, Halifax,...