Installation Guidelines; Proper Log Placement; Proper Primary Airflow Into The Burner; Candles - Procom Lost River PCILVFD18-1 Installation Instructions Manual

Vent-free gas logs for use with pcilvfd 18,24 h, pcilvfd 18,24 rt and pcilvfd 18,24 t chassis
Table of Contents

Advertisement

Sunken Fireplace

If installing this unit into a sunken fireplace,
you must raise the floor to insure adequate
airflow and guard against sooting. Raise fire-
place floor using a noncombustible material,
which is secure.

Glass Doors

Make sure that glass doors are open during
all operations of the log set. The opening of
WARNING: Failure to posi-
tion the parts in accordance
with these diagrams or failure
to use only parts specifically
approved with this heater may
result in property damage or
personal injury.
CAUTION: After installation
and periodically thereafter,
check to ensure that no yellow
flame comes in contact with any
log. With the heater set to High,
check to see if yellow flames
contact any log. If so, reposi-
tion logs according to the log
installation instructions in this
manual. Yellow flames contact-
ing logs will create soot.
Middle Log
Bracket
PCILVFD18RT Chassis Shown. Actual model may vary.
200359-01A

INSTALLATION GUIDELINES

INSTALLING LOGS
Front Log Bracket
www.usaprocom.com
the glass door frame should be the dimen-
sion used for the minimum front opening of
the firebox.

Wood Burning Fireplaces

The interior of the firebox and the chimney
should be cleaned and free of all creosote be-
fore installing a gas burning log set. Creosote
will soften when heated and can drop on the
log set causing odors and possibly sooting.
Do not attempt to use this heater if any logs
are missing or damaged.
Inspect the contents of this log set to insure
there are no missing or damaged logs. If any
logs are found missing or damaged contact
customer support for replacements.
It is very important to install the logs exactly
as instructed. Do not modify logs. Use only
logs supplied with heater.
Each log is marked with a number. This number
will help you to identify the logs when installing.
After installing logs, add decorative cinders
around the grate base, do not place any
decorative cinders on logs or burner.
NOTE: During initial operation of a new heat-
er, burning logs will give off a paper-burning
smell. Orange flame will also be present.
Open damper or window to vent smell. This
will only last a few hours.
Each of the following pages contains a list
of replaceable parts for each log set. When
ordering parts, contact authorized dealers
of this product or call customer service at
1-866-573-0674. When calling have you
model and serial numbers available.
Rear Log Bracket
3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Lost River PCILVFD18-1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

Lost river pcilvfd18-2Lost river pcilvfd24-1Lost river pcilvfd24-2

Table of Contents