Risk of pinching when handling the toggle fastener.
The machine must not be used in environments where explosive gases may be present. Serious
risk of explosion
The machine should be turned off at the switch before releasing the power lead from the wall
outlet. If the switch is in the on position, a spark can occur between the contact on the power
Remove the plug from the wall socket when carrying out maintenance work. Risk of personal
Dust that is hazardous to health can be spread when the coarse filter and the absolute filter are
replaced. Accordingly, the user should wear protective glasses, protective gloves, and a
breathing mask conforming to protection class FFP2
Do not puncture the absolute filer. Risk of dust dispersion.
Connect the lead to the power outlet, attach the outlet hose if available. Start the machine by pressing
the start knob. The air scrubber has two speeds.
The air scrubber separates material in two stages:
The first stage uses a coarse filter. This traps the bigger particles and acts as protection for the main
filter. The coarse filter should be changed on a daily basis.
The second absolute filter separates the unhealthy dust that is invisible to the eye.
Coarse filter characteristics
The coarse filter is strong and easy to change. It has low pressure drop and good separation capability.
The coarse filter takes care of big particles and acts as protection for the absolute filter.
Main filter characteristics
The main filter is an absolute filter with class HEPA H13 that is dimensioned for fine, dry dust and
should be preceded by a pre-filter.
The operating life of the absolute filter decreases and can be completely destroyed if exposed
The absolute filters cannot be cleaned and must be replaced when full.