Reset Button; Ssd Led; System Dc Input (3-Pin Euro Type Terminal Block) - Efco Eagle Eye-AIHD Series User Manual

3.2.2 Reset
The hardware Reset Button is used to reset the system without powering off the
system. Press the Reset Button for a few seconds to reset the system.
3.2.3 SSD/HDD LED
If the LED is on, it indicates that the system's storage is functional. If the LED is off,
that indicates that the system's storage is not functional. If the LED is flashing, that
indicates data access activity.

3.2.4 System DC Input (3-Pin Euro Type Terminal Block)

The Eagle Eyes AIHD / AIHD-P4E / AIHD-GP4E series allows a wide range of DC
power input from 9V to 36V DC. It offers a 3-pin, pitch 5.08mm Euro Type pluggable
terminal block. The 3-pin power connector is used to connect the power plug of an
AC/DC adapter. It's convenient for indoor usage where AC power is usually available.
Since there is no specific rule of pin definition for this type of connector, please
always confirm the polarity of the power source before plugging it into the Eagle
Eyes-AIHD / AIHD-P4E / AIHD-GP4E series if you're not using the power adapter
provided by EFCO.
Pin
1
2
3
Caution!
1. Make sure the polarity of the power plug is correct before plugging it into the system.
2. Please make sure the voltage of the DC power supply is correct before you connect it to the
Eagle Eyes-AIHD / AIHD-P4E / AIHD-GP4E series system. Supplying a voltage over 36V will
damage the system.
Button
SSD/HDD LED
Storage Active
Name
DC V+ DC INPUT +
DC V- DC INPUT -
Ground Earth Ground or Chassis Ground
Eagle Eyes-AIHD User Manual
LED Status
Flash Green
Description
18