Efco Eagle Eye-AIHD Series User Manual page 3

Eagle Eyes-AIHD User Manual
Copyright
Copyright © 2020 EFCO. All rights are reserved. EFCO reserves the right to make
improvements to the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or transmitted in any
form or by any means without the prior written permission of EFCO. Information
provided in this manual is intended to be accurate and reliable. However, EFCO
assumes no responsibility for its use, nor for any infringements of the rights of third
parties, which may result from its use.
The material in this document is for product information only and is subject to change
without notice. While reasonable efforts have been made in the preparation of this
document to assure its accuracy, EFCO assumes no liabilities resulting from errors or
omissions in this document or the use of the information contained herein.
EFCO reserves the right to make changes in the product design without notice.
Acknowledgments
All brand names and/or trademarks are the properties and registered brands of their
respective owners.
For more information about this and other EFCO products, please visit our website at
www.efcotec.com.
Declaration of Conformity
FCC
This equipment has been tested and found to comply with the limits for a Class A
digital device, according to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
CE
The product(s) described in this manual complies with all applicable European Union
(CE) directives if it has a CE marking. For computer systems to remain CE compliant,
only CE-compliant parts may be used. Maintaining CE compliance also requires
proper cable and cabling techniques.
ii