Husqvarna 333R Workshop Manual page 35

Centrifugal clutch
The shaft contains a long guide for the
drive axle.
Dismantling for possible replacement is
done by first removing the plastic
sleeve (B).
The drive axle is guided in the shaft
with the help of a star shaped guide (A)
which the axle runs through. This
prevents axle oscillation, which in turn
can cause vibration.
The axle and guide can easily be pulled
out of the shaft once the sleeve (B) is
pried off with a screwdriver.
Assembly
Assemble in the reverse order as set out
for dismantling.
Check that the circlips are fitted
correctly in respective slots.
Lubricate the hole (A) in the clutch
drum's connection on the drive axle
using copper paste to aid assembly and
dismantling in the future.
Rub the vibration element (B) with talc
so that it slides into position easier.
Lubricate the drive axle with grease no.
503 80 17-01 when assembling in the
guide.
503 80 17-01
4
33