Advertisement
Figure 3. Installing the cover panel on the back side of the tray assembly
6. Install the cover panel (see Figure 3).
a. Align the cover panel's
equipment rack's rear rails.
b. Securely fasten the cover panel to the equipment rack's rear rails using one hex
5
screw
for each side. The cover panel will conceal the tray assembly's top and
bottom hex screws in both of the equipment rack's rails.
7. Provide power to the switch.
a. Insert the included power cord into the Model L10 switch and connect it to a power
outlet.
Refer to the switch's User's Guide for the proper procedure on powering on the
switch.
7
mounting holes with the empty center holes in the
2006 Model L10 Fixed Rack-Mount Kit Instructions
5
Advertisement
