Husqvarna 123HD60 Workshop Manual page 24

3
22
Fuel system
8. Remove the throttle control (B), the
throttle cable (C), the triangle link (D)
and the stop switch (E).
9. Remove the screw (F) and detach and
twist in the opposite direction the lock
(G) that prevents handle rotation.
Assemble the throttle handle in the re-
verse order as set out for dismantling.
Note the following:
Make sure that the short-circuit cable is
properly pressed into the handle half so
that it is jammed in place.
Lubricate the O-ring with a little grease so
that the handle is easy to twist.