Table of Contents
Advertisement
LCD Icon descriptions
1 2
3
25
24
23
22
21
20
19
18
17
16 15 14
1. Auto heat/cool selection
2. Schedule icon
3. Permanent/temporary override
4. Fan is running(icon is animated)
5. Fan speed (low, medium, high, Auto, OFF)
6. Wireless communication with the Universal
Gateway
7. FC600 is connected to the Universal Gateway
and Internet
8. Temperature unit
9. Heating Mode ON
10. Cooling Mode ON
11. Standby mode
12. Occupancy/vacancy sensor
13. Lock function
14. AM/PM
15. Eco Mode
16. Current day of the program
17. Filter needs to be replaced
18. Current time
19. Sensor indicators
20. Timer icon
21. Program number
22. Sensor indicators
23. Sensor indicators
24. Room/setpoint temperature
25. Setpoint temperature indicator
Schedule
Mode
18 | SmithsEP.co.uk | Issue 003 - August 2020
4
5
6
7
8
9
10
11
12
13
Temporary
Permanent
Override
Override
Getting started
All units are factory configured in off-line stand
alone mode and tested for function when built.
Should your unit require setup from storage or
reconfiguration to "Smart Home" App control
follow the steps below to ensure successful setup
and operation.
1. Setup as stand alone control
(Confirm unit function)
2. Connect to "Smart Home" App
Requires Universal Gateway Hub (UG600)
available as an accessory product code:
HACA33130
Note: These instructions demonstrate settings
and setup required to work with our appliance.
Complete setup instructions for the control can
be found at:
https://salus-controls.com/uk/product/fc600/#downloads
or use the QR code below:
Advertisement
Table of Contents
