Related Manuals for Swann Smith's Ecovector II Low Level
Summary of Contents for Swann Smith's Ecovector II Low Level
- Page 1 Ecovector II Low ® Installation, commissioning and user manual LL 640 | LL 1030 | LL 1390 Ecovector II Low Level Issue 001 | July 2022 ENGLISH | UK | IRL | SmithsEP.co.uk Issue 001 - July 2022 | SmithsEP.co.uk | 1...
-
Page 2: Table Of Contents
Contents Introduction Declaration of conformity Symbols Introduction In the event of items missing or visible damage EC Declaration of conformity This manual contains information and please contact us on 01245 324560. prescriptions marked by the following symbols. Declaration of conformity We, Smith’s Environmental Products Limited 1-2 Blackall Industrial Estate Symbols used in this guide... -
Page 3: Important Safety And Installation Instructions
Important safety and installation instructions Prior to installation, read these installation and operating instructions. The installation and operation should also be in accordance with national regulations and accepted codes of good practice. 8. Electrical connection This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if Important: Connection to the power supply must be effected by means of a fixed they have been given supervision or instruction concerning use of the appliance in a safe... -
Page 4: Product Dimensions
Product dimensions Product performance Heat output Heat Output at 80° Heat Output at 75° Heat Output at 70° Model Normal Boost Normal Boost Normal Boost return (kW) (kW) (kW) (kW) (kW) (kW) flow ECOVECTOR II LL 640 ECOVECTOR II LL 1030 ECOVECTOR II LL 1390 100mm min. -
Page 5: Installation
Installation - product Installation - controller 2. Controller - Quick Set up Check for water leaks. Remove any trapped air from the system via the vent valve on the top left hand side of the heat exchanger. Do not over IMPORTANT –... -
Page 6: Commissioning
Heating operation Note: Failure to switch on the mains power Note: If the heat symbol flashes the target and press the controller ON/OFF button within temperature of the SLVTB thermostat controller is 20 seconds will result in the heater and lower than the current room temperature –... -
Page 7: User Manual
Ecovector II Low ® Notes User manual LL 640 | LL 1030 | LL 1390 Ecovector II Low Level Issue 001 | July 2022 ENGLISH | UK | IRL | SmithsEP.co.uk 12 | SmithsEP.co.uk | Issue 001 - July 2022 Issue 001 - July 2022 | SmithsEP.co.uk | 13... -
Page 8: How It Works
How it works Accessories Disposal Ecovector includes a low temperature thermostat that prevents the fan(s) operating until the central heating system water passing through the heat As part of the policy of continuous product Your Ecovector is designed to operate as For accessories or spares please refer to our price exchanger reaches a set temperature. - Page 9 Happy to help To view the full product information download the datasheet at: Smith’s Environmental Products Ltd is one of the leading manufacturers of heating and cooling www.SmithsEP.co.uk products in the UK. We are committed to achieving the highest standards and our faith is For product information, customer services or supported by a free parts and labour guarantee sales support call us on +44 (0) 1245 324900...