Advertisement
IMPORTANT: Please register your product without delay. Simply scan this QR code using your smartphone, or go to
https://www.dimplex.co.uk/register.
If you do not have access to the internet, pelase call us on 0344 879 3588
How does the heater control work?
The control allows you to choose when you want heat and at what temperature. When using a timer mode (see below)
you when the heater is maintaining the temperature displayed. The current time will be displayed when the heater is outside of a timed heating period.
When
Manual,
Schedule or
Set the Time
To set the date and time on the heater, press Menu, then press Up three times to highlight the
decrease the hour, press Enter to confirm. Repeat this process to set the minutes, Day, Month and Year. Press Enter to confirm and return to home screen.
Set the Temperature
The temperature shown on the display is the target room temperature known as Setpoint. This is the temperature that the heater will maintain during the heating
periods. If the room temperature is above this temperature then the heater will not operate. The heater leaves the factory with this temperature set at 21
represents a typical comfortable room temperature. If you require a different room temperature then press either Down or Up until the display shows the temperature
you require
Your heater comes pre-programmed with four heating periods. These periods set the time and temperature at which the heater operates in Comfort ON mode.
These four periods are:
• P1: 07:00 – 09:00 21
o
C
• P2: 10:00 – 12:00 7
o
C
• P3: 13:00 – 15:00 7
o
C
• P4: 17:00 – 21:00 21
o
C
Child Lock
If you need to lock the controls so that the settings cannot be changed then activate the Child Lock. To lock the controls press and hold both the Back button and
Enter button together for 3 seconds. The
seconds.
Advance
Sometimes you may be at home when you had not planned to be or need to leave when you had planned to have heating on. You can change the way you use
your heating temporarily; this temporary change is achieved using the Advance function.
When a timer has been selected, the Advance function allows you to begin the next period early. If the heater is in a Comfort Off period and you want heat - press
the Advance button. The Advance icon
and it will go off until the beginning of the next Comfort On Period.
The controls are located on the top of the heater. The heater is fitted with an adjustable electronic controller consisting of a display screen and six touch sensitive
buttons:
Quick Start Guide
Frost modes are being used the heater will always maintain the temperature shown on the home screen.
Lock icon will appear on the screen. To unlock repeat the action by pressing both the Back button and Enter for three
will be displayed on the screen. If the heater is in the Comfort On and you don't want heat, press the Advance button
1
2
DO NOT COVER
1
Back Button
2
Menu Button
3
Advance Button
4
Up & Down
5
Enter
6
Indicator "ON"
7
Days of the Week
8
Display Screen
9
Indicator "OFF"
Date & time Icon, press Enter. Use the Down and Up to increase/
3
4
5
6
7
8
Adaptive Start
Schedule
Open Window
Manual Mode
Lock
Frost Protect
Sound
Set Time & Date
Connectivity
Advance
will display on the home screen to tell
9
C which
o
Advertisement
