Integration With Bosch Allegiant Matrix Switcher And Videojet Decoder 3000; Integration With Pelco Matrix Switcher And Videojet Decoder 3000 - Bosch MIC Series Tech Note

18/18 | Confi guration of MIC IP 7000 HD – VIDEOJET decoder 3000 – for integration with analog CCTV
4.5.2

Integration with Bosch Allegiant matrix switcher and VIDEOJET decoder 3000:

The Bosch Allegiant series offers an extensive portfolio of analog matrix switchers. Depending on the
selected matrix switcher family, there are direct Biphase ports on the main switching bay or available
through additional signal distribution. Because the VIDEOJET decoder 3000 cannot accept the
Biphase output directly, an additional converter (MIC-BP3) is required for each MIC IP 7000 HD. The
schematic below explains the connectivity and the interface between the MIC IP 7000 HD and the
Allegiant matrix switcher.
Figure 19: Allegiant matrix switcher using Biphase control with a MIC BP3 to a VIDEOJET decoder
3000.
4.5.3

Integration with Pelco matrix switcher and VIDEOJET decoder 3000

The telemetry control signal from the Pelco matrix switcher is available through Code Distribution
units such as those from the CM 9760 series, standalone keyboards like KBD 300 series, or matrix
switcher systems like CM6700 or equivalent. The Pelco code can be interfaced directly to the
VIDEOJET decoder 3000 series. The schematic below explains the physical interface between the CM
9760 and VIDEOJET decoder 3000 series. (The interfaces for other Pelco devices will follow the same
conven-tion.)
Figure 20: Interface between Pelco controller and VIDEOJET decoder 3000.
For specifi c menu options for Pelco products, please refer to the manufacturer's installation manuals.
Version 1.3 | September 2015 Bosch Security Systems