Table of Contents
Advertisement
Measured at the clutch
pedal, this
free-play
should amountto 10---20 mm.
(0.4 "-0.8
") (a). The clearance may be
adjusted
at the adjusting nut on the
cable end.
1-
Release lock nut on the threaded
cable
end.
2-
Adjust clutch clearance by turning
the
adjusting nut. Depress clutch
pedal
several
times and recheck
pedal
free-play.
3- When
the correct adjustment
has
been
reached, hold adjusting nut in
position
and tighten
lock
nut.
4 - Grease clutch cable adjusting nut
with Universa
l
Grease.
STEERING GEAR
In
the
straight-ahead
position
there should be no play. The play within
the
steering
mechanism should be as small as possible, but care must be
taken
that the front wheels resume their straight-ahead
position after the
vehicle
has taken a turn. All operations or adjustments
required
should
only
be
performed by an Authorized VW Dealer.
FRONT WHEEL BEARINGS
We recommend that you refer this
operation to
an
Authorized
VW
Dealer, as maladjustment may cause
severe damage to the roller bearings.
If circumstances
require the removal
of
a front
brake drum, the front wheel
bearings are
to
be adjusted as follows:
•
61
Advertisement
Table of Contents
