Table of Contents
Advertisement
ADJUSTING
OR REPLACING
THE FAN BELT
To adjust or replace the fan belt, re-
move nut and outer half of generator
pulley.
When
loosening or tightening
nut, insert a screwdriver in the slot in
the inner half
of
the pulley and support
it against the upper generator housing
bolt.
The
fan belt tension is adjusted
by means of
spacer
washers situated
between the two pulley halves.
Belt
slackness is taken up
by
removing one
or more washers.
If
the
belt
is too
taut, one or
more
washers should be
added.
45
Advertisement
Table of Contents
