Before The First Use; Charging The Battery; Operating The Shaver; Operating The Long Hair Trimmer - Westfalia LASER 2000 RSCW-8006 Instruction Manual

Operation

Before the first Use

If present, remove any protective films or stickers from the foil and
from the long hair trimmer. Before the first use, charge the build-in
battery for at least 12 hours.

Charging the Battery

Connect the power mains adaptor to the charging socket (9) of the
shaver. Please observe correct polarity; there is a nose and notch
on plug and socket. Connect the power mains adaptor to a suitable
wall socket. The red Charging LED (8) on the unit lights up. The
normal charging time is 12 hours. Avoid charging the battery for
more than 24 hours.

Operating the Shaver

Push the ON/OFF switch (5) forward towards the shaving head. The
shaver now starts up.

Operating the Long Hair Trimmer

Slide the Pusher (4) for the long hair trimmer (3) forward towards
the shaving head. The long hair trimmer folds out of the unit and is
ready to use. Turn on the shaver as usual; the long hair trimmer
now starts up.

Operating the Nose and Ear Hair Trimmer

To turn on the nose and ear hair trimmer, press the silver button (6).
Insert the head of the nose and ear hair trimmer into your nose or
ear and lightly move it.

Cleaning and Maintenance

While you do not use the shaver, protect the foil from damage with
the included clear plastic cover. After shaving, remove the forward
cap from the shaver. To do so, press both locking buttons (2) and
pull the cap off the shaver. Blow clean and brush out the cap and
the shaver. A cleaning brush is included.
6