Xantech XT-HDBT-SP14-4K-KIT Quick Reference Manual

Xantech XT-HDBT-SP14-4K-KIT Quick Reference Manual

Advertisement

®

Certifications

FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION
- changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
the equipment.
CANADA, INDUSTRY CANADA (IC) NOTICES
This Class B digital apparatus complies with Canadian ICES-003.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
CORRECT DISPOSAL OF THIS PRODUCT
This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used
device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for
environmentally safe recycling.
main:
1 (800) 472-5555 - US
1 (707) 283-5900 - International
1 (707) 283-5901 - Fax
tech support:
tech@xantech.com
XT-HDBT-SP14-4K-KIT
web:
www.xantech.com
QUICK REFERENCE GUIDE
www.xantech.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XT-HDBT-SP14-4K-KIT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Xantech XT-HDBT-SP14-4K-KIT

  • Page 1 ® XT-HDBT-SP14-4K-KIT QUICK REFERENCE GUIDE Certifications FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 2 • Supports PoH (Power over HDBaseT™) to power compatible HDBaseT™ receivers • HDMI audio breakout via analog L/R audio and coaxial digital outputs concurrently • Advanced EDID management • HDCP 2.2 © 2018 XANTECH is a registered trademark of Nortek Security & Control. 10019299 REV-A0 ®...
  • Page 3 Audio Out 12V 5A HDMI input - connect to a HDMI source IR output - connect to Xantech 12V IR emitter for source control from HDBaseT™ receivers HDMI loop output - connect to a HDMI display Coaxial digital audio output HDBaseT™...
  • Page 4 • 4x XT-HDBT-EX70-4K-RX • 4x Mounting kit for XT-HDBT-EX70-RX • 1x 12V/5A DC power supply • 1x Mounting kit for XT-HDBT-SP14-4K • 1x Quick reference guide © 2018 XANTECH is a registered trademark of Nortek Security & Control. 10019299 REV-A0 ®...

Table of Contents