Table of Contents
Advertisement
Quick Links
Important safety instructions! Please read before connection!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION: To prevent the risk of electric shock, do
not open the unit under any circumstances.
Refer all maintenance and repair work to a qualified
workshop or contact your dealer.
The lightning flash symbol warns the user
of uninsulated voltage and the risk of
electric shock.
The exclamation point symbol alerts the
user to important maintenance and
operating instructions in the instruction
manual.
Suitable for indoor use only
Read operating instructions
This symbol defines the minimum distance
of the object to be illuminated.
For environmental reasons, please recycle the
packaging correctly.
A new product can sometimes lead to unwanted odours
or to minimal smoke development for a short period of
time. This reaction is normal and disappears after a few
minutes.
The unit is intended for indoor use only (IP20)! Please
use the device only in a dry environment. Keep the unit
away from rain, moisture, direct heat and dust.
In order to avoid condensation in the device, the device
should adapt to the ambient temperature before start-
up.
Please place the device in a well ventilated place, out of
the reach of flammable materials or liquids.
Do not cover any ventilation openings as this may
result in overheating.
Please disconnect the power plug if the unit is not to be
used for a long period of time or if maintenance work is
to be carried out.
The device is designed for a maximum ambient
temperature of 40° Celsius.
The device should not be installed by inexperienced
persons and must be installed in compliance with the
mechanical and electrical safety regulations in your
country.
If the power cord is damaged, it must be replaced
immediately with an original spare part from the
manufacturer.
Make sure that the mains voltage is not higher than the
voltage indicated on the housing.
In case of a malfunction of the device, please contact your
dealer and stop the operation of the device immediately.
Advertisement
Table of Contents
Related Manuals for FAME MC 10
Summary of Contents for FAME MC 10
- Page 1 Important safety instructions! Please read before connection! The device is designed for a maximum ambient RISK OF ELECTRIC SHOCK temperature of 40° Celsius. DO NOT OPEN The device should not be installed by inexperienced √ persons and must be installed in compliance with the ATTENTION: To prevent the risk of electric shock, do mechanical and electrical safety regulations in your not open the unit under any circumstances.
- Page 2 ENGLISH Power supply/power cord Manufacturer: MUSIC STORE professional GmbH, The power cord must not be laid near hot objects such Istanbulstraße 22-26, 51103 Cologen, Germany as heaters or radiators Avoid excessive buckling of the power cord Do not place heavy objects on the cable Ensure that no one can step on or trip over the cable and do not roll any objects over it Pay attention to the mains voltage prescribed for this...
-
Page 3: Intended Use
Manual Intended use: The product FAME MC 10 was designed for use as an amplifier for incoming microphone signals. The device may only be used for this purpose and in accordance with the operating instructions. Other purposes as well as operation under other operating conditions are expressly not intended and can lead to damage to property or personal injury! No liability is assumed for damage resulting from improper use. -
Page 4: Safety Instructions
ENGLISH Safety instructions: DANGER! (For babies and children) Packaging, plastic films and other packaging materials must be properly stored or disposed of. They must be kept out of the reach of babies and children due to the risk of suffocation. Make sure that children never use the device unattended! In addition, make sure that children do not remove any (small) parts from the device, as they could suffocate by swallowing them! -
Page 5: Installation
Note on operation: When switching on the FAME MC 10, make sure that the gain control is turned to 0 and turn it up slowly. The Clip LED lights red when the signal is overdriven. Turn down the Gain knob until the Clip LED stops lighting. -
Page 6: Specifications
ENGLISH Specifications: Features MC 10 Frequency range 50HZ up to 20kHz (+/- 3dB) High-pass filter - 6dB/octave from 90 Hz Input level -34 dBu up to -3 dBu +26 dBu (XLR balanced) // -24 dBu (mini-jack max. output level unbalanced) -
Page 7: Troubleshooting
ENGLISH Troubleshooting: The following overview serves as an aid for quick troubleshooting. If you are unsafe, contact the manufacturer, the dealer or the corresponding specialist personnel. Never open the device on your own! Symptom Troubleshooting Check the enclosed mains connection and your fuse. - Page 8 ENGLISH Notes MS ID: REC0007048-000 09/2018...