The touch screen returns to the Fax standby screen.
5. Tap Black or Color.
The printer starts scanning the document.
Important
• Color transmission is available only when the recipient's fax device supports color faxing.
• Do not open the document cover until scanning is completed.
6. Start sending.
• If you load the document in the ADF:
The printer scans the document automatically and starts sending the fax.
Note
• To cancel a fax transmission, tap Stop. To cancel a fax transmission while it is in progress,
tap Stop, and then follow the instructions on the touch screen.
• If documents remain in the ADF after the Stop is tappedd while scanning is in progress,
Document in ADF. Remove the document from the document tray and tap [OK]. is
displayed on the touch screen. By selecting OK, the remaining documents are automatically
ejected.
• If you load the document on the platen:
After scanning the document, the confirmation screen asking you if you load the next document is
displayed.
To send the scanned document, select Send now to start sending it.
307