Canon TR8600 Series Online Manual page 210

position differs depending on Media Type. If Media Type is set to plain paper, it is fed from the
cassette (main tray). If set to other types of paper, it is fed from the rear tray.
• If printing paper such as photo paper and postcards that cannot be printed on both sides,
uncheck the Two-Sided checkbox.
Note
• Use the Print dialog to set general print settings such as the layout and the print sequence.
For information about print settings, refer to macOS help.
7. Click Print
The printer prints according to the specified settings.
Note
• It can take the Wi-Fi a few minutes to get connected after the printer turns on. Print after checking
that the printer is connected to the network.
• You cannot print if Bonjour settings of printer are disabled. Check LAN settings of printer and enable
Bonjour settings.
• Refer to "Cannot Print Using AirPrint" for printing problems.
• The display of the settings screen may differ depending on the application software you are using.
• If you print with Media Type set to Premium Fine Art Rough, the paper may get rubbed, reducing
the print quality at the top and bottom edges. When creating print data with the application software,
we recommend that you create 35 mm margins on the top and bottom edges.
Printing of Envelopes
For printing on the envelope from Mac, refer to the following.
Print result image
The print data is rotated by 180 degrees
Orientation of print data
against the print result image.
Orientation of loading envelope
Load the envelope in vertically with the address side
facing up so that the folded flap of the envelope will
be faced down on the right side.
210