Removing The Meat Drawer And Cover; Removing The Crispers And Crisper Cover; Using The Ice Cube Trays - Whirlpool ET18HT Use And Care Manual

Removing the meat drawer and cover
To remove the meat drawer:
1.
Slide meat drawer out to the stop.
2.
Lift
front
of meat drawer.
3. Slide meat drawer out the rest of the
way.
4. Replace in reverse order.
To
remove the cover:
1.
Tilt front of cover up.
2. Lift back of cover.
Pull out to the stop,
lift the front and pull
again.
3. Pull cover straight out.
4. Replace cover in reverse order.
Removing the crispers and crisper
cover
To remove the crispers:
1.
Slide the crisper straight out to the stop.
2. Lift the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1.
Push up glass insert from the bottom,
then slide it out with both hands.
2. Lift front of cover frame.
3. Pull cover frame up and out.
4. Remove metal cover support.
To replace the cover:
1.
Replace metal cover support on wall
supports in front section of cabinet.
2. Fit back corners of cover frame into notch
supports on walls of refrigerator, then
lower front onto metal cover support.
3. Slide back of glass insert into cover
frame. Then lower front to level position.
I I'
Pull out to the
Remove the
Using the ice cube trays
If you don't use cubes, they may shrink. The
moving cold air starts a slow evaporation.
The longer you store cubes, the smaller they
get.
To remove ice:
1.
Hold tray at both ends.
2. Twist slightly.
11