Easy Retrieve™ Program Memory; Programmable Delay Between Stations; Clearing The Controller's Memory/Resetting The Controller - Hunter XC Hybrid Owner's Manual And Installation Instructions

For use with xch plastic, xch stainless steel, and xch solar panel controllers
Hide thumbs Also See for XC Hybrid:
Table of Contents

Advertisement

ADVANCED FEATURES
Easy Retrieve
Program Memory
The XC Hybrid is capable of saving the preferred watering
program into memory for retrieval at a later time� This
feature allows for a quick way of resetting the controller
to the original programmed watering schedule�
To save the program into the memory
1� With the dial in the RUN position, press and hold the
and
buttons for 5 seconds� The display will scroll
three segments
from left to right across the display
indicating the program is being saved into memory�
2� Release the
and
buttons�
To retrieve a program that was previously saved into
memory.
1� With the dial in the RUN position, press and hold the
and
buttons for 5 seconds� The display will scroll
three segments
from right to left across the display
indicating the program is being saved into memory�
2� Release the
and
buttons�

Programmable Delay Between Stations

This feature allows the user to insert a delay between
stations between when one station turns off and the next
one turns on�
1� Start with the dial in the RUN position�
2� Press and hold the
button down while turning the dial
to the RUN TIMES position�
3� Release the
button� At this point the display will show
a delay time for all stations in seconds, which will be
flashing�
4� Press the
or
buttons to increase or decrease the
delay time between 20 seconds and 4 hours�
5� Return the dial to the RUN position�
Clearing the Controller's Memory/ Resetting
the Controller
If you feel you have misprogrammed the controller, there
is a process that will reset the memory to the factory
defaults and erase all programs and data that have been
entered into the controller�
1� Press and hold down the
2� Press and release the reset button in the lower
wiring compartment�
3� Wait 2 seconds and release the
should now show 12:00
AM
cleared and the controller may now be reprogrammed�
button�
button� The display
� All the memory has been
17

Advertisement

Table of Contents
loading

Table of Contents