Manually Run A Single Station; Manually Run All Stations; One Touch Manual Start And Advance - Hunter XC Hybrid Owner's Manual And Installation Instructions

PROGRAMMING THE CONTROLLER

Manually Run a Single Station

1� Turn the dial to MANUAL – ONE
STATION position�
2� Station run time will flash in the display�
Use the button to move to the desired
station� You may use the
to select the amount of time for a station
to water�
3� Turn the dial clockwise to the RUN position to run
the station (only the designated station will water,
then the controller will return to automatic mode
with no change to the previously set program)�
Also see One Touch Start and Advance�

Manually Run All Stations

1� Turn dial to MANUAL – ALL
STATIONS position�
2� Select program A, B, or C by pressing the
button�
3� Station run time will flash in the display� Use the
or button to select the amount of time for
a station to water if different from the run time
displayed�
4� Use the button to move to the next station�
5� Repeat steps 3 and 4 to customize each station�
6� Press the button until you reach the station at
which you would like watering to begin�
1
MANUAL-ONE STATION
1
or button
ALL
MANUAL-ALL STATIONS
ALL
Turn the dial clockwise to the RUN position (the
controller will water the entire program beginning with
the station number last left in the display, then return
to the automatic mode with no change in the previously
set program)�

One Touch Manual Start and Advance

You can also activate all stations to water without using
the dial�
1� Hold down the button for 2 seconds�
2� This feature automatically defaults to program A� You
can select program B or C by pressing the
3� The station number will be flashing� Press the
button to scroll through the stations and use the
button to adjust station run times� (If no buttons
are pressed for a few seconds during step 2 or 3, the
controller will automatically begin watering)�
4� Press the button scroll to the station you wish to
begin with� After a 2-second pause, the program will
begin� At any time during the manual cycle, you can
use the or buttons to navigate from station to
station manually�
button�
or
15