Eliminating A Program Start Time; Setting Station Run Times; Setting Days To Water; Selecting Specific Days Of The Week To Water - Hunter XC Hybrid Owner's Manual And Installation Instructions

For use with xch plastic, xch stainless steel, and xch solar panel controllers
Hide thumbs Also See for XC Hybrid:
Table of Contents

Advertisement

PROGRAMMING THE CONTROLLER
NOTE: One start time will activate all stations sequen-
tially in that program. This eliminates the need to enter
each station's start time. Multiple start times in a
program can be used for separate morning, afternoon,
or evening watering cycles. Start times may be entered
in any order. The XC Hybrid will automatically sort them.

Eliminating a Program Start Time

With the dial set to the START TIMES
position, push the
or
you reach 12:00 AM (midnight)� From
here, push the
button once to reach
the OFF position�

Setting Station Run Times

1� Turn the dial to the RUN TIMES
position�
2� The display will show the last program
selected (A, B, or C), the station
number selected,
icon, and the
station will be flashing� You can switch
to another program by pressing the
button�
3� Use the
or
button to change the
station run time on the display� You can
set the run times from 0 to 4 hours�
4� Press the
button to advance to the
next station�
12
button until

Setting Days To Water

1� Turn the dial to the WATER DAYS position�
2� The display will show the last program
selected (A, B, or C)� You can switch to
another program by pressing the
3� The controller will display the seven days of the
week (MO, TU, WE, TH, FR, SA, SU)� Each day will
START TIMES
have a icon or a
would represent an "On" water day, while a
would represent an "Off" watering day�

Selecting Specific Days of the Week to Water

1� With the cursor on a specific day (the
cursor will always start with MO), press
the
button to activate a particular
day of the week to water� Press the
button to cancel watering for that
RUN TIMES
day� After pressing a button the cursor
automatically advances to the next day�
2� Repeat step 1 until all desired days have been
selected� The selected days will show a to
indicate their status is ON� The last is the
last day of watering for that program�
button�
icon above the day� The icon
icon
WATER DAYS
Mo Tu
Mo
Tu We
We Th
Th Fr Fr Sa
Sa
Su
Su

Advertisement

Table of Contents
loading

Table of Contents