Whirlpool RUD0800EB Installation Instructions Manual page 4

Location and Rough-In
/
24"
A
Electrical, drain and
water supply line
entrances must
be confined to
shaded areas to
avoid interference
with components.
Figure I
Most of the installation work should be done before
the dishwasher is moved into place. First, select a
location as close to the sink as possible for ready
access to water and drain lines. For proper operation
and appearance of the dishwasher, the cabinet
opening should be square and have dimensions as
shown in Figure 1. If the dishwasher is to be installed
in a corner, there must be sufficient clearance to open
the door as shown in Figure 2. A minimum clearance
of 2" is recommended.
Rough-in the water, electrical, and drain lines before
proceeding with the installation. The lines should run
straight to their connections on the dishwasher.
Note: Make sure that the lines do not cross in
front of the dishwasher motor or its legs.
c
-
1
Dishwasher
Dishwasher
Door
Countertop
2" Minimum 1
Figure 2