Monitor Settings
USER1, press the joystick straight down to confirm the selection, it
will write the specified LUT file into the monitor from the SD card.
Second, use LOOK tool to activate a LUT to current scene.
Operation: scroll the joystick right to access a scene, and add a
LOOK tool for the scene, for example, set the ENABLE item as ON,
SETTING item as USER, and USER LUT as USER1, thus, it will
apply USER1 to current scene display. After activating a LUT file, it
will be loaded to the image display immediately, as shown in Figure
5.2-13:
Figure 5.2-13 Output Image Applied with a LUT File
Make sure to restart the device to effect the selected user LUT file
after loading it to a designated LUT directory through the SD card.
There will a "File format not support!" prompt for unavailable LUT file
when executing file writing operation.
The items about RED/GREEN/BLUE GAIN are available only in
USER mode. If the COLOR TEMP sets as USER with customized
settings, you can select the menu item RGB GAIN RESET command
to restore product originals for Gains.
Refer to "6.1.4 Look Tools" for the details about loading the 3D LUT
file.
Make sure your SD card is FAT32 format, otherwise, it will not be
supported in this monitor.
36