OSEE G7 4K ULTRAHD User Manual page 40

Monitor Settings
Set system
ON, it will be able to load LUT file.
Set system
OFF, it will be disable to load LUT file.
2.
Load LUT File
First, write the designated LUT file to the monitor.
Operation: Select system
LUT FILE item to choose a LUT file from SD card.
Scroll the joystick right to display the LUT file list menu, as shown in
Figure 5.2-11, scroll up or down to select a LUT type as USER LUT,
CAMERA LUT or CALIBRATION LUT, and press the joystick
straight down to confirm the selection. Then, it will pop up a series of
directories for navigating to the designated LUT file, scroll up or down
to select the LUT file with .cube suffix, and specify its storage
directory, as shown in Figure 5.2-12, please don't cut off the power
during loading.
Figure 5.2-10 Calibration LUT Menu
CALIBRATION LUT
CALIBRATION LUT
CALIBRATION LUT item as
CALIBRATION LUT item as
LOAD LUT FILE
34
EXECUTE LOAD