Advertisement
Quick Links
Aqara Camera Hub G2H Quick Start Guide
A Product Introduction
G2h is an intelligent hardware product with dual functions of camera and
gateway, which has functions of visual intercom, mobile detection, voice detection,
TF card video recording, etc. at the same time, it can be used as a ZigBee gateway
to coordinate with other sensors, controllers and other ZigBee sub devices to realize
home care, data reporting and intelligent control. It supports the connection of
Apple homekit platform and can be connected through Apple "Home" APP
Remote control is realized.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Aqara G2H
Summary of Contents for Aqara G2H
- Page 1 Aqara Camera Hub G2H Quick Start Guide A Product Introduction G2h is an intelligent hardware product with dual functions of camera and gateway, which has functions of visual intercom, mobile detection, voice detection, TF card video recording, etc. at the same time, it can be used as a ZigBee gateway to coordinate with other sensors, controllers and other ZigBee sub devices to realize home care, data reporting and intelligent control.
- Page 2 B Warnings * This product is NOT a toy. Please keep children away from this product. * This product is designed for indoor use only. Do NOT use in humid environments or outdoors. * Beware of moisture, do NOT spill water or other liquids onto the product. Do NOT place this product near a heat source.
- Page 3 1. Download the APP Scan the QR code, or search for "Aqara Home" on the App Store. Download and install the Aqara Home App. 2. Power on and start up Find the power jack on the back of the product and connect the USB power cable.
- Page 4 Open Aqara Home App, and click “+” on the upper corner of the homepage. Select “Smart Camera G2H”, and operate it as the App prompts. After the device is connected successfully, the blue indicator light will be always on. If the device failed to be added, please check the following steps: * Please make sure the camera is connected with the 2.4GHz Wi-Fi network;...
- Page 5 the bottom of the camera to bind the device to HomeKIt. Adding HomeKit failures guide: * ”Cannot add accessories”. Due to multiple adding failures, the error information of iOS system cache cannot be removed. Please restart the iOS device and reset the camera; * ”The accessory has been added”.
- Page 6 5. Add sub-devices After the camera is added successfully, please open Aqara Home App and add the sub-devices as the product instruction shows. 6. Product installation 1. Please make sure the camera is added successfully, and then install it on the wall.
- Page 7 * Please make sure the installation position within the coverage range of the Wi- * Do not place it near strong electromagnetic interference sources * The product is only limited to be used indoors. Please do not use it in humid environment or outdoors;...
- Page 8 Wireless Protocol: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz, Zigbee Local Storage: Micro SD card (CLASS 4 or above is supported, up to 32GB storage) Supported device: Android 4.0 or iOS13.2 and above Operating Temperature：-10℃～40℃ Online Customer Service: kjds@aqara.com Manufacturer: Lumi United Technology Co., Ltd.
- Page 9 Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road, Liuxian Ave, Taoyuan Residential District, Nanshan District, Shenzhen, China.
Need help?
Do you have a question about the G2H and is the answer not in the manual?
Questions and answers