Replacing The Front Cover Lens; Replacing The Inside Cover Lens - Westfalia 76 53 13 Instruction Manual

Auto darkening welding helmet
Table of Contents

Advertisement

Available languages

Available languages

Replacing the Front Cover Lens

Take care that the front cover lens is clean at every time. Replace it
immediately if there are any cracks or scratches.
F
3. For changing the front cover lens put a finger or a blunt object into the
notch (F) and lift up the lens at the mounting (D or E). Take off the lens.
4. To reset the new lens, hook it into one of the mountings (D or E). Press
the slightly inwards curved lens into the opposite retainer until it locks
visibly and audibly.

Replacing the Inside Cover Lens

Make sure, that the inside cover lens is also clean at every time and without
any irregularities of surface. Change immediately the inside cover lens if it is
damaged.
1. To replace the inside cover lens put a
blunt object into the notch (G) and lift up
the lens.
2. To reset hook the lens first into one of
the sideward retainers. Press the lens to
the bottom until it locks.
Using
D
16
E
G

Advertisement

Table of Contents
loading

Table of Contents