Advertisement
A. Insert a power cord into the main Inlet.
B. Turn the power switch ON
C. Before the switch turn it off, you better to set all buttons & indicators to "Minimum" or "OFF"
1. How to use HSS mode with Canon DSLR Camera. ('H'Mode, 'h'Mode)
HSS function is possible only with SWING III
SWING III has two version. Canon, Nikon.
Before using HSS mode, please, check your Camera type and SWING III version.
Press, '+' button for 2 sec of SWING III Transmitter.
-
- Press, 'RPT/HSS' mode button(A1) for 2 sec on i-flash's control panel
The capital letter 'H' can support HSS on DSLR Camera's Full frame body type
-
Compatible Camera model : Canon models after Canon 5D..
-
Press, RPT/HSS mode button (A1) again.
The small letter 'h' can support HSS on DSLR Camera's APC-S body type.
-
Compatible Camera model : Canon models after Canon 1D..
SWING III (Canon version) is compatible with Nikon camera up to 1/160sec shutter speed.
Under Swing III's NSS Mode(Normal Sync Speed Mode)
SWING III (Canon version) is compatible with Canon camera up to 1/200sec shutter speed.
Under Swing III's NSS Mode(Normal Sync Speed Mode)
How to cancel HSS mode.
Press, ' Mode' button on i-flash control panel.
-
Press, ' –' button on SWING III-Transmitter.
-
8
Operation Instruction for i flashes
Advertisement
