Display; Remote Controller On; Transmitting Display; Operation Mode - Lennox M0STAT60Q-1 Operation Instructions Manual

• .

Display

Remote Controller ON

Transmitting Signal Display
Operation Modes
Set Point or Room Temperature
• Remote controller On. Icon displays
to indicate that the remote controller
is on.
• Transmitting display. Icon blinks
once when a signal is sent from the
wireless remote controller.
• Operation mode.
show the current mode of operation.
Press the mode button to scroll
through the
Auto → Cool → Dry → Heat → Fan.
These icons
operation modes:
Timer ON
Timer OFF
Not Used
• Setpoint or Room Temperature.
Displays the setpoint temperature
during normal operation. Displays the
room temperature when in Follow me
mode. Adjust the setpoint with up &
down arrow buttons. No display when
unit is in Fan mode.
• Remote controller On. Icon displays
to indicate that the remote controller
is on.
• Transmitting display. Icon blinks
once when a signal is sent from the
wireless remote controller.
Not Used
Battery Charge Status
Night Mode
Follow Me
Not Used
Fan Speed