Infrared Remote Control; Display Indicators - Lennox OLR-1X
 User Manual

INFRARED REMOTE CONTROL

INFRARED SIGNAL TRANSMISSION
Input signals to the air conditioner are sent
from here.
TEMPERATURE ADJUSTMENT
BUTTONS
Used to select the desired temperature.
Pressing the or buttons will increase or
decrease the required room temperature
value.
FAN SPEED SELECTION
Select between ventilation speeds
(high, medium, low, and automatic).
HIGH MEDIUM
H
M
AUTO
LOW AUTOMATIC
L
SWING BUTTON
Press SWING button to activate the
Air Sweep function.
ON TIMER BUTTONS
Used to program the switching ON
of the unit at a specified time.
TIMER BUTTONS
Used to set clock.

DISPLAY INDICATORS

FAN SPEED INDICATOR
It indicates the fan speed selection.
LOW
HIGH
L
H
AUTO
MEDIUM AUTOMATIC
M
OPERATING MODE INDICATORS
It indicates the operating mode of the unit.
COOL HEAT
FAN AUTO
TIME INDICATOR
It indicates the actual time. While ON TIMER - OFF TIMER
selection, it indicates the time selected.
FAN
SWING
ON
CLR
DRY
AUTO
H M L
°F
°C
MODE
SLEEP
OFF
CLR
AUTO
H M L
°F
°C
2
LCD DISPLAY
It indicates operation modes, setting temperatures
and time programming.
ON/OFF BUTTON
Press the button to start the unit, press it again to
switch it off.
MODE BUTTON
Press it to select the operating function: COOL,
HEAT, DRY, FAN, AUTO.
COOL HEAT
FAN AUTO
SLEEP MODE
Press it to activate the sleep or energy saving mode
(Not available on fan mode operation and dry mode).
OFF TIMER BUTTONS
Used to program the switching OFF of the unit at
a specified time.
SIGNAL TRANSMISSION INDICATOR
It indicates that the selection made on the infrared
control is being sent to the unit.
SLEEP INDICATOR
It indicates that the sleep mode has been activated.
AIR SWEEP INDICATOR
It indicates that the Air Sweep function has been
activated.
ON TIMER - OFF TIMER
It indicates that the ON TIMER or OFF TIMER mode
has been selected.
DRY