BlackVue DR750S-2CH IR User Manual page 11

Button
Sensor
Backup Battery
Input Power
Power Consumption
Operation
Temperature
Storage
Temperature
High Temperature
Cut-Off
Certifications
Software
Application
Other Features
For more information about using the DR750S-2CH IR or DR900S-2CH IR, please
download the DR750S-2CH or DR900S-2CH manual from www.blackvue.com > Support >
Downloads.
Wi-Fi / Format button:
* Press once to turn on/off Wi-Fi.
* Press and hold for 5 seconds and once voice commands
start, release the button. Then press once again to
reset the Wi-Fi SSID and password or press and hold for
5 seconds to format the microSD card.
Proximity sensor:
Touching the proximity sensor turns on/off audio recording
or triggers manual recording depending on the firmware
settings.
3-Axis Acceleration Sensor
Built-in super capacitor
DC 12 V – 24 V (DC Plug:
Avg. 400 mA (4.8 W at 12 V, when GPS is On and Wi-Fi is Off)
Avg. 340 mA (4.08 W at 12 V, when GPS and Wi-Fi are Off)
* Approx. 40mA increase in current when IR LEDs are ON.
* Actual power consumption may vary depending on use
conditions and environment.
-20 °C − 70 °C (-4 °F − 158 °F)
-20 °C − 70 °C (-4 °F − 158 °F )
Approx. 70 °C (158 °F)
Front: FCC, CE, RoHS, Telec, WEEE, IC
Rear: FCC, CE, RoHS, WEEE
BlackVue Viewer
* Windows XP or higher and Mac Yosemite OS X (10.10) or
higher
BlackVue Application (Android 4.4.2 or higher, iOS 9.0 or
higher)
Adaptive Format Free File Management System
(Ø3.5 x Ø1.35), MAX 1 A/12 V)
DR750S-2CH IR | DR900S-2CH IR 11