Advertisement
37
38
39
1) Take the metal edf mount (included with
the kit) to lock up the EDF set on the
bay and lock up the ESC on the wooden
plate as shown.
2) Pls be reminded to check the EDF
set space is fully enough installed
your EDF set (specially other brand
name edf set). Otherwise, you need
to cut out some foam to gain the
space or add some strong foam tape
to fill up the gap before locked up by
the metal mount.
1) Put on the foam edf cover with some
double tape for fixing.
2) Pls make sure the both side edge of
cover should be on the same level as
the fuselage. Otherwise, you need to
cut out some foam on the cover for
gaining more space or add some
foam in order to meet the above
requirement.
1) Install the elevator control horn and link
up the push rod with servo.
- 18 -
Advertisement
