Advertisement
31
32
33
1) Prepare to install the upper rear fuselage
to the main fuselage. Pls be reminded to
check up the four reinforcement carbon
tube able connect the right position on
the main fuselage and make sue whole
set stabilizer on the right angle before
glue up.
1) Take enough epoxy to glue the upper
rear fuselage on the main fuselage.
1) After glued up action, take one y & one
extension cable to link up both side elevator
servos and one more extension cable for
rudder servo. Then use some hot melt glue
to fix on the cable on the right position as
shown.
- 16 -
Advertisement
