Advertisement
Quick Links
Advertisement
Related Manuals for RC Lander F9F-2
Summary of Contents for RC Lander F9F-2
- Page 1 F9F-2 OPERATIONAL MANUAL 2 different material 7 different color to meet customer’s choice. F9F-2/OB: Original Blue 1. EPS F9F-2/TB: Tail Blue F9F-2/YB: Yellow/Blue 2. SEPO F9F-2/WR: White/Red F9F-2/GYR: Gray/Yellow/Red 3 PC-Cover F9F-2/GRW: Gray/Red/White F9F-2/BRY: Blue/Red/Yellow...
- Page 2 It is also made as a highly maneuverable model for the intermediate to expert pilot. With the F9F-2 model which includes EDF set*, speed controller, electric servo and landing gear with front steering (retract landing gear &...
-
Page 3: Specifications
Specifications: Wing Span : 1050mm Length: 1000mm Height: 300mm Flying weight: 1150 g up Servo: 9g×5pcs or9pcs Power system: Brushless electrical ducted fan Up to 1200g with 3s Thrust: Up to 1450g with 4s Up to 1600g with 6s Function: Retract landing gear system, full scale flap performance(optional), Gear doors system. - Page 4 EDF SYSTEM EDF68-1A Material: Aluminium Alloy,Metal special Weight: Ca. 90g(Motor not included) Rotor: 68mm dia,5-bladed. Max rpm 45,000 rpm Application: 200-700W Static Thrust: Up to 1.45kg(14.21 N ,48.3oz) Related product 1. LEDF68-1A43 2. LEDF68-1A39 3. LEDF68-1A35 4. LEDF68-1A21 EDF68-1AP Material: Aluminium Alloy,Metal special Weight: Ca.
-
Page 5: Main Accessories
It must be installed into the plane body or test stand for operation. 4. Please don’t remove any parts of this unit by yourself. Since it has been done well balancing procedure. Otherwise it may be affected the performance after any removal action. Main Accessories MAIN WING SET WING FUEL TANK (RIGHT &... -
Page 6: Assembling The Aircraft
3) Extension cord x 2 & Y cord x 3 (not included) 4) Push rods for Elevator, Rudder, Aileron, Retract Gear & Steering (included) 5) One plastic bag includes screws, Control Horns, Linkage Stoppers & Retract Landing Gear. Assembling the aircraft Take out the elevator from the horizontal stabilizer Use the epoxy set to glue up the elevator Install the elevator &... - Page 7 Put the horizontal stabilizer into vertical stabilizer with epoxy Then link up the rudder and glue up with epoxy Please link up both servo of rudder & elevator with the extension cord first Install those into the main fuselage with epoxy. Then install the intake set (right &...
- Page 8 Install the front retract landing gear & battery hard wood platform Glue the lower front fuselage into main fuselage Take out the aileron from the main wing Use the epoxy set to glue up into the main wing Install the main retract landing gear - 8 -...
- Page 9 Install both of wing fuel tank into main wing with epoxy Install the canopy plastic lock up set The canopy set is used push in method to install into main fuselage and push down the front canopy with click to lock up. Hand holds the front canopy and pull up to open it for changing the battery or doing any maintenance issue.
- Page 10 Install the EDF set and ESC system Lock up the EDF cover set Link up the elevator push rod Link up the right & left aileron push rods - 10 -...
- Page 11 Flight: To keep F9F-2 flying only need 50% of the maximum power, it is a good idea to fly with power for a while and glide for a while. In this way you can prolong the maximum flight time and familiarize yourself with landing approaches.
- Page 12 ★ Install new dry cells. ★ Contact the distributor. ★ The circuit in F9F-2 has been damaged due to crash. The rudder is not on the center position. Adjust the rudder on the center position. Can not fly straightly Adjust the micro-adjuster on the transmitter for the rudder on the suit position.
- Page 13 Nose Gear & door fully open position Main Gear & Door fully open position. Fully closed main gear position - 13 -...
- Page 14 Nose gear fully closed position Configuration of main Gear doors Configuration of nose Gear doors - 14 -...
- Page 15 Addition 2: FLAP INSTALLATION INFORMATION Cut out the flag part form the main wing and prepare a linkage rod and control hom shown as the picture. - 15 -...
- Page 16 Check up the flag system to be able operated well or not. The flag system has been completed. The throws of flag is recommended to make two point 20% and 35% and final trim during on flight Addition 3: HAND LAUNCHING VERSION (F9F-2) INSTALLATION INFORMATION - 16 -...
- Page 17 Fix up the gear PVC sheet with strong double tape or hot melt glue as shown Fix up the nose gear PVC sheet with strong double tape or hot melt glue as shown New PVC sheet intake air cover - 17 -...
- Page 18 Fix up the PVC sheet intake air cover into the main body with strong double tape or hot melt glue as shown F9F-2 hand launch version is completed as shown. - 18 -...