Advertisement
22
23
24
1) Gear down both side main gear first.
2) Glue up on side pre-cut wooden plate
(shorter one) on one side maid wing
(bottom) slot as shown.
1) Take enough epoxy to glue up both side
main wings together.
2) Recommend to take some epoxy to
fit up the gap or at lease on the upper
of both of wooden plates for
reinforcement purpose.
1) After finished the bottom side, turn
around to install the upper side
reinforcement wooden plated (included
with the kit) on the middle main wing
slots as shown.
2) Take some epoxy to fit up the gap or
at least on the upper position of both
of wooden plates for reinforcement
purpose.
- 13 -
Advertisement
