Selecting A Cycle; Changing A Setting - Whirlpool DU4000XR Series Use & Care Manual

--
I
OPTION SELECTOR BUllONS
DOOR LATCH CYCLE CONTROL KNOB
Selecting a cycle
POTS & PANS Cycle
Maximum cleaning for cooked- or
baked-on foods. Timer delays while
the dishwasher automatically heats
the water to 145'F (63°C) in both
washes and the last rinse (marked '1,
Cycle time will be about 1% to 2
hours, depending on time needed
to heat water.
NORMAL WASH Cycle
A double wash for normal to heavily
soiled loads. (The Energy Guide
Label data is based on this cycle.)
Cycle time is about 60 minutes.
LIGHT WASH Cycle
For normal, everyday soiled loads.
Cycle time is about 60 minutes.
RINSE & HOLD Cycle
For rinsing a few items to be washed
one or more days later. Cycle time
is about 10 minutes.
Use AIR DRY only.
Changing a setting
You can change a setting anytime during
any cycle.
1.
Press in the door latch to unlatch the door
and stop the cycle.
2. Turn the Cycle Control Knob clockwise to the
cycle you want.
3. Be sure the detergent dispensers are filled
properly for the new cycle.
4. Close and latch the door. The dishwasher will
automatically start the new cycle.
9