Inflation Pressure - Kioti DK55 Manual

8-2 DK55
TIRES
(A) Insuffient (B) Standard
(C) Excessive
Though the tire pressure is factory-set
to the prescribed level, it naturally drops
slowly in the course of time. Thus, check
it everyday and inflate as necessary.
Do not use tires larger than speci-
fied.
Do not attempt to mount a tire.
This should be done by a quali-
fied person with the proper
equipment. Qualified persons
with the proper tire mounting
equipment should recognize the
following warning.
Never exceed 241 kPa (35 psi)
when attempting to seat a bead. If
069O801A
beads have not been seated by the
time the pressure reaches 241 kPa
(35 psi), deflate the assembly, re-
position the tire on the rim, redu-
plicate and reinflate. After seat-
ing the bead, adjust inflation pres-
sure as recommended in the in-
flation pressure chart.

INFLATION PRESSURE

WARNING C l a s s i f i -
Tire Size
cation
9.5 - 20
Front
(1.4 kgf/cm
AG
14.9 - 28
Rear
(1.4 kgf/cm
Front 29 x 12.5 -
(1.4 kgf/cm
15
TURF
21.5L - 16.1
Rear
(1.7 kgf/cm
12 x 16.5
Front
(1.4 kgf/cm
IND.
17.5L - 24
Rear
(1.4 kgf/cm
Inflation
Pressure
140 kPa
2
,
20 psi)
140 kPa
2
,
20 psi)
140 kPa
2
,
20 psi)
170 kPa
2
,
24 psi)
140 kPa
2
,
20 psi)
140 kPa
2
,
20 psi)