Encoding And Recording Onto A Usb Device/Sd Card - Lenoxx BCD118 Instruction Manual

• To pause playback, press the PLAY/PAUSE ( ▶‖) button once to halt playing. Press it
again to continue playback.
• To play the previous track, press ▎◀◀ once or hold down continuously to rapidly
progress through previous tracks.
• To play the next track, press ▶▶ ▎ once or hold down continuously to rapidly advance
through tracks.
• To delete a file on your media storage device, while in playback mode, press and hold the
REC/DEL button until the "DEL" LED light flashes along with "dL" on the display. Then press
REC/ DEL again and the "DEL" LED will flash rapidly and the file will be deleted.
• To delete a file on your media storage device: While in STOP mode, select the track by
pressing ▶▶ ▎or ▎◀◀ , press and hold the REC/DEL button until the "DEL" LED light flashes
along with "dL" on the display. Then press the REC/DEL again and the "DEL" LED will flash
rapidly and the file will be deleted.
• To stop playback of the music track, press the ■/USB/SD/B button.

Encoding and Recording onto a USB Device/SD Card

This unit has the capacity to encode your traditional music media (vinyl records, cassette
tapes, CD's, Bluetooth and Aux in device) into digital format and record it onto a USB device
or SD card as MP3 file(s).
• Insert a storage device (USB or SD card) into the relevant slot.
• Get your traditional music media ready for playback:
- place a record on the turntable
- insert a cassette tape into the cassette slot
- insert a CD into the CD player disc tray
- begin playback from your Bluetooth device
- connect an Aux in device to the AUX IN socket
• Set the function switch to the appropriate music playback method.
NOTE: If you are recording via Cassette, make sure an AUX IN cable is not connected to AUX
socket.
• Press the REC button to start recording. "rE" will appear on the display screen and the
"REC" LED will illuminate. A few seconds later the "REC" LED will start flashing and recording
will begin.
Then start playing your traditional music media.
• Press the STOP button to stop recording. The music track(s) will be saved directly onto
the storage device (USB device or SD card) as MP3 file(s).
NOTE:
• The recording volume level can be adjusted with the Volume control knob.
• The recording speed is 1:1. Recording will take as long as playing the record, cassette
tape or CD.
• The recording format is preset at MP3 bit rate 128 kbps.