Table of Contents
Advertisement
To do this, you must access the Selection of net-
work sub menu, select the Set preferred list op-
tion and use
to select the empty location in
which you want to store the new network. Pres-
sing
EDIT
will give you a list of available net-
works. Scroll through the list using
see a network you wish to store in your preferred
OK
list, just press
. If you select a currently used
location and press
EDIT
can be deleted when you enter the new one. Just
press
EXIT
to leave the list as it was.
Once a network is stored in the preferred list, you
can always see the country and network code of
the actual network by pressing
preferred list option.
Power saving
To save your battery and thus increase both
conversation and standby times you can select
whether you want the display contents to be
visible or not in standby mode.
Select
Display remains on
to be visible, and
Display switches off
if you want it not to be visible. The display will
switch off after 3 minutes in standby mode.
In standby mode the display and keypad backlight
will always switch off after 10 seconds if your tele-
phone is set to
Backlight on
have the option of having the backlight switched
off permanently by selecting
Car kit installation
This option is only effective if the phone is con-
nected to a handsfree car kit. See page 39 for
more information.
. When you
, the former occupant
EDIT
in the Set
if you want it
. However, you
Backlight off
PHONE SETUP
Welcome greeting
You can change the welcome greeting of your
phone according to your own wishes. Delete the
old message by holding
greeting via the keypad and confirm by pressing
OK
.
Incoming call setup (fax/data)
Do not enter this menu unless you are using your
phone for fax and data communications! Fax and
data capability will require a separate data inter-
face kit (optional). The menu settings are explained
in the user guide supplied with this kit.
Any key answer
You can answer an incoming call by pressing any
key you like except for the left function key and
the arrow keys if you select
Any key answer on
Factory settings
You can always return to the original setup of
your phone. The phone is set up by the manu-
facturer as follows:
Language:
Dial setup:
Network:
Power saving:
.
Car kit:
Greeting:
Incoming call setup: Next call type: Speech
Any key answer:
CLEAR
, enter the new
.
Automatic
Autoredial off
Speed dialling on
Automatic
Display on
Backlight on
Auto answer off
Auto power off automatic
Welcome
All call type: Speech
Off
33
Advertisement
Table of Contents
