Setting The Controls; Selecting A Wash Cycle - Whirlpool 920 Series Use And Care Manual

Setting the Controls

Selecting a wash cycle

Press a Cycle. The dishwasher starts filling
once you press a Cycle pad, unless you
select the delay wash. You can press
Options as the machine is filling.
CYCLE
RINSE ONLY
For rinsing a
few items to
RINSE
ONLY
be washed
one or more
days later.
Do not use detergent.
CHINA
Light wash
and a gentle
CHINA dry for china
and crystal.
Use covered detergent
dispenser.
LOW ENERGY
Single wash
for prerinsed
LOW
or lightly
ENERGY
soiled loads.
Use covered detergent
dispenser.
LOW ENERGY/CHINA
Single wash
LOW
ENERGY
for prerinsed,
lightly soiled,
CHINA
china or
crystal loads.
Use covered detergent
dispenser.
*
Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher.
The cooler the water, the longer the cycle time. If the water is already hot enough, the cycle times will be as
shown.
†
A small amount of water runs through the pump to remove soil particles.
A "•" shows what each cycle includes
PRE- MAIN
WASH RINSE WASH RINSE
•
•
•
NOTE: Your model may have some or all
of the cycles shown.
FINAL
†
PURGE RINSE
•
• •
140°F
(60°C)
• •
140°F
(60°C)
•
•
140°F
(60°C)
WATER CYCLE
USE
TIME
(gal)
DRY (min)
2.2 10
• 64*
6.5
• 6.5 68*
• 6.5 68*
15