Siemens Gigaset 4000 Quick Start Manual page 2

Gigaset 4000 Handset
The handset included with the system is automatically registered with the
base station. Up to a total of four handsets (dependent on system) may be
added to any Gigaset 4010, 4015, 4210, or 4215 base.
Handset Setup
Before using your handset, follow these steps:
1
Remove protective
plastic film from display.
2
Insert batteries
3
as shown.
Place cover on back
of handset and push
gently upward
until it clicks
into place.
IMPORTANT: Charge batteries 12 to 14 hours before using the
handset for the first time. WARNING: Use only NiCd or NiMh
“AA” rechargeable batteries. DO NOT USE ALKALINE, LITHIUM,
OR NON-RECHARGEABLE BATTERIES.
Automatic Registration to Base Unit
1
Place handset in base with display facing out.
Note: DO NOT press the END
(On/Off) key before placing handset
in base. (If handset is on, turn it off.)
2
After approximately one minute,
handset will register to the base and
the next unassigned intercom
number (2 through 4) is automatically
assigned. The intercom number
appears in the upper left of the
handset display. The handset reverts
to the idle state.
3
Place handset in charger or base unit
with display facing out and follow
charging instructions as above.
See User Manual for additional options.
Customer Care: 1-888-777-0211
Or visit our Website: www.icm.siemens.com
Visite nuestro sitio Web para obtener instrucciones en español.
Lights up during a call;
-incoming calls
-new messages
4
Place handset
-dial a telephone
in charger
with display
Directory key
facing out.
Open the directory
(Programmable) Hold
down to select the
answering machine or
telephone company
Hold down to turn
on/off the ringer
Hold key down to pause;
press to answer
End key and On/Off key
Intercom telephone
number of the handset
Your handset is now registered
and ready for use.
LED
flashes at:
-new calls
Headset
Charge status
Jack
Display screen
Talk key
-answer a call
Current display
number
Soft keys
End key and
On/Off key
-end the call
Key 1
-cancel function
-one menu level back
(press briefly)
-return to idle state
(hold down)
voice mail
-when the telephone is
idle on/off (hold down)
Star key (*)
Pound key (#)
Hold down to turn
Microphone
on/off keypad
Flash key
protection
Memory key
waiting call
Customer Care: 1-888-777-0211
Or visit our Website: www.icm.siemens.com
Visite nuestro sitio Web para obtener instrucciones en español.
Sold by:
http://www.TWAcomm.com
Toll Free: (877) 892-2666
BASIC PHONE OPERATION
Making a Call 1 Dial desired number.
2 Press .
3 Press or place handset in base
(or charger) to hang up.
Lift handset from base (or charger)
Answering Call
or press .
Intercom Call 1 Lift handset.
2 Select INT, select the desired handset’s
intercom number, and press
3 To call all handsets, select INT and
press « or press « , select INT, and
press .
4 Press or place handset in base
(or charger) to hang up.
1 Open the Menu.
Setting Volume
2 Scroll to “Handset Settings” and
press OK.
3 Select “Handset Volume” and press
OK.
You will hear the current volume in the
earpiece and its level is displayed. Scroll
to the desired volume and press OK.
1 Open the Menu.
Setting Language
2 Press ¬ and then press Ÿ .
3 To select English (default),
press Þ and ] ;
to select French, press Þ and Ÿ ;
to select Spanish, press Þ and ^ .
Paging Handset Press the page button on the base bottom.
Customer Care: 1-888-777-0211
Or visit our Website: www.icm.siemens.com
Visite nuestro sitio Web para obtener instrucciones en español.
.